Electrochemical synthesis of ZnO nanoflowers and nanosheets on porous Si as photoelectric materials

Well-aligned ZnO nanoflowers and nanosheets were synthesized on porous Si (PS) at different applied potentials by electrodeposition approach. The deposits were grown using the optimized program and were characterized by means of cyclic voltammetry (CV), amperometry I-t (I-t), open-circuit potentiometry. X-ray diffraction (XRD) analysis proved a strong preferential orientation (1 0 0) on PS. Scanning electronic microscopy (SEM) observation showed the deposits consist of nanoflowers with uniform grain size of about 100 nm in diameter and nanosheets, which may have potential applications in nanodevices and nanotechnologies. Thus, ZnO grown on PS can be used as photoelectric materials due to its larger photoelectric effect compared to Si wafer according to open-circuit potential (OCP) study. Optical band gap measurements were made on samples using UV-visible spectrophotometer thus giving a band gap of 3.35 eV.     

具有横向磁晶各向异性的钴纳米线的微波吸收性能

使用电化学脉冲沉积法制备了磁晶各向异性易磁化方向(c轴)垂直纳米线长轴方向的钴纳米线.受到磁晶各向异性、静磁相互作用等因素与形状各向异性相互竞争的结果,纳米线阵列的磁滞回线显示出较弱的磁各向异性.此外,在2—18 GHz频率范围内,纳米线/石蜡复合材料的介电色散谱的虚部在5 GHz处有一个主峰,在10 GHz附近有一个较弱的峰;德拜弛豫特性和材料的电导率对这两个峰的形成均有贡献.同时,其磁导率色散谱的虚部在频率为6.1 GHz处有一个主峰,在10 GHz以上有两个较微弱的峰. 前一个峰源于自 关键词： 钴纳米线 介电色散谱 磁导率色散谱 微波吸收剂     

漏致势垒降低效应对短沟道应变硅金属氧化物半导体场效应管阈值电压的影响

结合应变硅金属氧化物半导体场效应管(MOSFET)结构,通过求解二维泊松方程,得到了应变Si沟道的电势分布,并据此建立了短沟道应变硅NMOSFET的阈值电压模型.依据计算结果,详细分析了弛豫Si_1－βGe_β中锗组分β、沟道长度、漏电压、衬底掺杂浓度以及沟道掺杂浓度对阈值电压的影响,从而得到漏致势垒降低效应对小尺寸应变硅器件阈值电压的影响,对应变硅器件以及电路的设计具有重要的参考价值. 关键词： 应变硅金属氧化物半导体场效应管 漏致势垒降低 二维泊松方程 阈值电压模型     

超导纳米线单光子探测器

利用磁控溅射、电子束光刻和反应离子刻蚀等微加工技术,开展了超导纳米线单光子探测器(SNSPD)的研究.通过对SNSPD的设计和制备工艺参数的优化,成功制备出了高质量的SNSPD.单光子检测实验表明,制备的SNSPD对660 nm波长的光信号,系统检测效率可达30%,对1550 nm波长光信号,最大系统检测效率为4.2%.在平均暗计数小于10 c/s的情况下,系统检测效率大于20%(660 nm)和3%(1550 nm). 关键词： 单光子 氮化铌 纳米线 探测器     

Local structure and magnetism of Fe, Co and Ni doped Cr3Si

The lattice site occupation of 3d-type impurities in Cr₃Si doped with Fe, Co and Ni were studied using the Extended X-ray Absorption Fine Structure (EXAFS) technique, X-rays and magnetic susceptibility measurements. The EXAFS measurements were performed particularly carefully on the K-edge of chromium and cobalt. EXAFS data strengthened by simulations of the spectra show unambiguously that the impurities are occupying mostly Cr-sites. The magnetic state of the alloys has been studied theoretically using the Wien2k code. It is observed that if calculations are not carried out on an appropriately fine mesh of points in k-space, one can get the result indicating ferromagnetism although the overall magnetic moment per formula unit is weak.     

Exciton states and interband optical transitions in wurtzite InGaN/GaN quantum dot nanowire heterostructures

Within the framework of the effective-mass approximation, the exciton states and interband optical transitions in In_xGa_1−xN/GaN strained quantum dot (QD) nanowire heterostructures are investigated using a variational method, in which the important built-in electric field (BEF) effects, dielectric-constant mismatch and three-dimensional confinement of the electron and hole in In_xGa_1−xN QDs are considered. We find that the strong BEF gives rise to an obvious reduction of the effective band gap of QDs and leads to a remarkable electron-hole spatial separation. The BEF, QD height and radius, and dielectric mismatch effects have a significant influence on exciton binding energy, electron interband optical transitions, and the exciton oscillator strength.     

GISAXS and SAXS studies on the spatial structures of Co nanowire arrays

The spatial structures of magnetic Co nanowire array embedded in anodic aluminium membranes were investigated by grazing incidence small angle X-ray scattering (GISAXS) and conventional small angle X-ray scattering (SAXS) techniques. Compared with SEM observation, the GISAXS and SAXS measurements can get more overall structural information in a large-area scale. In this study, the two-dimensional GISAXS pattern was well reconstructed by using the IsGISAXS program. The results demonstrate that the hexagonal lattice formed by the Co nanowires is distorted (a ≈ 105 nm, b ≈ 95 nm). These Co nanowires are isolated into many structure domains with different orientations with a size of about 2 μm. The SAXS results have also confirmed that the nanopore structures in the AAM can be retained after depositing Co nanowires although the Co nanowires can not completely but only just fill up the nanopores. These results are helpful for understanding the global structure of the Co nanowire array.     

Si-O-C骨架支撑型高循环性能锂离子电池硅基负极材料

通过经济有效的方法制备得到一种具有长循环寿命的高效稳定性硅/硅氧碳/无定形碳的复合负极材料结构. 在这种结构中,以具有稳定化学性能的硅氧碳结构作为骨架,来支撑和隔离硅纳米颗粒结构. 材料中包含的无定形碳组分可提高硅/硅氧碳结构的电导性能. 这种复合负极结构在0.3C电流充放电情况下,不仅能发挥出637.3 mAh·g^-1的比容量,而且在经过100 周的充放电循环后,其容量保持率也达到86%. 这种新型硅基负极材料的设计为其他功能材料的设计提供了一种潜在可能的方法.     

Ru0.7Si0.3O2/Ti电极电催化氧化处理硝基苯废水

制备了Ru0.7Si0.3O2/Ti电极,并以该电极作为氧化阳极,不锈钢为阴极,电催化氧化降解废水中硝基苯。 实验结果表明,当硝基苯初始质量浓度为220 mg/L时,最佳条件为：电流密度25×10-3 A/cm2;Na2SO4作为电解质时加入量为8 g/L;溶液初始pH=2。 在此最佳条件下,硝基苯去除率大于85%,TOC去除率大于50%,表明Ru0.7Si0.3O2/Ti阳极能有效去除废水中有机污染物;对中间产物的检测结果表明,硝基苯的降解是阴阳两极协同作用的结果。     

硅铝比对完全液相法制备的一步法二甲醚合成催化剂反应性能的影响

采用完全液相法制备了不同Si/Al摩尔比的浆状一步法二甲醚合成催化荆,在搅拌式反应釜中对其催化性能进行了评价.通过XRD,NH3-TPD-MS,H2-TPR和XPS等方法表征了催化剂的体相结构和表面性质.结果表明,完全液相法制备的CuZnSiAl催化剂在反应前其活性组分Cu主要以低价态存在,Cu晶粒大小是影响其活性的主...